Quote in 15 min·24/7 × 365AS9120:2025 · ISO 9001:2015 · FAA AC 00-56B
Catalogue

Cutting And Forming Tools For Secondary Metalworking Machinery NSN Parts Online Listing

20
Sample lines
Category overview

Detailed FSC 3456 cutting and forming tools for secondary metalworking machinery sourcing support.

At ASAP Aviation Hub, we provide the largest selection of fixed-wing and rotary-wing aircraft components and Cutting And Forming Tools For Secondary Metalworking Machineryon the the market. With over 3 billion new and obsolete parts featured on our database, we are a go-to distributor for the aviation community. As a leading enterprise, we readily offer fixed-wing aircraft components including 3430-1000, 59652, 55427, 8710-1709, AIW6700 with Handtool Wire, Drill Hand, Knife Utility, Cutter Tube, Cutter Cable Hand O. Owned and operated by ASAP Semiconductor LLC, we are an FAA AC-0056B accredited and ISO 9001:2015 certified enterprise. Our quality control practices and unmatched supply-chain network allow us to regularly meet AOG requirements with ease, and we maintain a 100% supplier rating from members within our client base. Are you ready for a quote for NSN Parts under Cutting And Forming Tools For Secondary Metalworking Machinery? Submit an Instant RFQ to get started.

Sample parts

Sample lines

  1. 029-19593
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  2. 029-19593
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  3. 029-19593-000
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  4. 029-19593
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  5. 029-19593
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  6. 029-19593-000
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  7. 02594
    Accessory Kit Tube
    In stockCAGE 53831NSN 3456-01-253-7711

    Accessory Kit Tube supplied for documented RFQ and sourcing workflows.

  8. 029-19593-000
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  9. 029-19593-000
    Expander Tube
    In stockCAGE 66935NSN 3456-01-257-5655

    Expander Tube supplied for documented RFQ and sourcing workflows.

  10. 00162
    Die Metal Punching
    In stockCAGE 9N506NSN 3456-01-310-8760

    Die Metal Punching supplied for documented RFQ and sourcing workflows.

  11. 00162
    Die Metal Punching
    In stockCAGE 9N506NSN 3456-01-310-8760

    Die Metal Punching supplied for documented RFQ and sourcing workflows.

  12. 018089
    Punch Metal Punching Machine
    In stockCAGE 30313NSN 3456-01-528-4008

    Punch Metal Punching Machine supplied for documented RFQ and sourcing workflows.

  13. 02594
    General Characteristics Item Description: End item-tube bender CL-300-2;FOR tube sizes 1.25, 1.50, 1.75, 2.00, 3.00;C/O P/N B-1.250-3.750, W-1.250-3.750, C-1.250-3.750, P-1.250-20.000, M-1.250-3-020-C 3 balls, M-1.250-3-035-C 2 balls, 1.250-3-042-C 1 ball, M-1.250-3-065-C 1 ball, M-1.250-3-083-C 1 ball, B-1.500-4.500, W-1.500-4.500, C-1.500-4.500, P-1.500-24.00, M-1.500-3-035-C 3 balls, M-1.500-3-042-C 3 balls, M-1.500-3-028-C 3 balls, M-1.500-3-072-C 3 balls, B-1.750-5.250, W-1.750-5.250, C-1.750-5.250, P-1.750-28.00, M-1.750-3-035C 3 balls, M-1.750-3-042C 3 balls, B-2.000-6.000, W-2.000-6.000, C-2.000-6.000 P-2.000-36.000, M-2.000-3-028-C 3 balls, M-2.000-3-035C 3 balls, B-3.000-9.000, W-3.000-9.000, C-3.000-9.000, P-3.000-40.00, M-3.000-3-035C 5 balls, M-3.000-3-042-C 5 balls;type tools-bend die, wiper die, clamp die, pressure die, mandrel;rqrd for oversize tubing capabilities
    In stockCAGE 53831NSN 3456-01-253-7711

    General Characteristics Item Description: End item-tube bender CL-300-2;FOR tube sizes 1.25, 1.50, 1.75, 2.00, 3.00;C/O P/N B-1.250-3.750, W-1.250-3.750, C-1.250-3.750, P-1.250-20.000, M-1.250-3-020-C 3 balls, M-1.250-3-035-C 2 balls, 1.250-3-042-C 1 ball, M-1.250-3-065-C 1 ball, M-1.250-3-083-C 1 ball, B-1.500-4.500, W-1.500-4.500, C-1.500-4.500, P-1.500-24.00, M-1.500-3-035-C 3 balls, M-1.500-3-042-C 3 balls, M-1.500-3-028-C 3 balls, M-1.500-3-072-C 3 balls, B-1.750-5.250, W-1.750-5.250, C-1.750-5.250, P-1.750-28.00, M-1.750-3-035C 3 balls, M-1.750-3-042C 3 balls, B-2.000-6.000, W-2.000-6.000, C-2.000-6.000 P-2.000-36.000, M-2.000-3-028-C 3 balls, M-2.000-3-035C 3 balls, B-3.000-9.000, W-3.000-9.000, C-3.000-9.000, P-3.000-40.00, M-3.000-3-035C 5 balls, M-3.000-3-042-C 5 balls;type tools-bend die, wiper die, clamp die, pressure die, mandrel;rqrd for oversize tubing capabilities supplied for documented RFQ and sourcing workflows.

  14. 02594
    Accessory Kit Tube Bending Machi
    In stockCAGE 53831NSN 3456-01-253-7711

    Accessory Kit Tube Bending Machi supplied for documented RFQ and sourcing workflows.

  15. 018089
    Special Features: Point is 0.250 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler
    In stockCAGE 30313NSN 3456-01-528-4008

    Special Features: Point is 0.250 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler supplied for documented RFQ and sourcing workflows.

  16. 018089
    Special Features: Point is 0.250 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler
    In stockCAGE 30313NSN 3456-01-528-4008

    Special Features: Point is 0.250 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler supplied for documented RFQ and sourcing workflows.

  17. 018089
    Punch Metal Punchin
    In stockCAGE 30313NSN 3456-01-528-4008

    Punch Metal Punchin supplied for documented RFQ and sourcing workflows.

  18. 018090
    Die Metal Punching
    In stockCAGE 30313NSN 3456-01-528-4042

    Die Metal Punching supplied for documented RFQ and sourcing workflows.

  19. 018105
    Special Features: Point is 0.500 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler
    In stockCAGE 30313NSN 3456-01-528-4016

    Special Features: Point is 0.500 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler supplied for documented RFQ and sourcing workflows.

  20. 018105
    Special Features: Point is 0.500 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler
    In stockCAGE 30313NSN 3456-01-528-4016

    Special Features: Point is 0.500 in. in dia. at top, and 0.125 in. long, 90 degrees; matl is S-5 omega; has keyway 0.254 - 0.258 in. W X 0.130 in. D END Item Identification: Press, punch Style Designator: Round with coupler supplied for documented RFQ and sourcing workflows.