Quote in 15 min·24/7 × 365AS9120:2025 · ISO 9001:2015 · FAA AC 00-56B
Catalogue

Crystal And Glass Industries Machine NSN Parts Online Listing

20
Sample lines
Category overview

Detailed FSC 3635 crystal and glass industries machine sourcing support.

At ASAP Aviation Hub, we provide the largest selection of fixed-wing and rotary-wing aircraft components and Crystal And Glass Industries Machineon the the market. With over 3 billion new and obsolete parts featured on our database, we are a go-to distributor for the aviation community. As a leading enterprise, we readily offer fixed-wing aircraft components including 3430-1000, 59652, 55427, 8710-1709, AIW6700 with Handtool Wire, Drill Hand, Knife Utility, Cutter Tube, Cutter Cable Hand O. Owned and operated by ASAP Semiconductor LLC, we are an FAA AC-0056B accredited and ISO 9001:2015 certified enterprise. Our quality control practices and unmatched supply-chain network allow us to regularly meet AOG requirements with ease, and we maintain a 100% supplier rating from members within our client base. Are you ready for a quote for NSN Parts under Crystal And Glass Industries Machine? Submit an Instant RFQ to get started.

Sample parts

Sample lines

  1. 117976
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: XTILT SPINDLE; WITH RANDOM MOTION; 24 IN. PAN; 1 SPINDLE; 46 IN. LG; 36 IN. W; 44 IN. H; NET WEIGHT: 650 LBS; SPINDLE SPEED IS 12 TO 110 RPMS; OSCILLATING SPEED IS 10 TO 100 RPMS; 2 MOTORS,EACH 1/2 H.P.,220/440 VOLT,3 PHASE,60 CYCLE
    In stockCAGE 99369NSN 3635-01-168-6964

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: XTILT SPINDLE; WITH RANDOM MOTION; 24 IN. PAN; 1 SPINDLE; 46 IN. LG; 36 IN. W; 44 IN. H; NET WEIGHT: 650 LBS; SPINDLE SPEED IS 12 TO 110 RPMS; OSCILLATING SPEED IS 10 TO 100 RPMS; 2 MOTORS,EACH 1/2 H.P.,220/440 VOLT,3 PHASE,60 CYCLE supplied for documented RFQ and sourcing workflows.

  2. 106FB
    Grinding Machine Gl
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Gl supplied for documented RFQ and sourcing workflows.

  3. 106FB
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTG,ABRASIVE BELT DATA,1 EA,NO. 80 AND 120 GRIT,4 IN. W,106 IN. LG,ELECTRIC MOTOR DATA,3/4 HP AC,110/120V,60 HZ,SINGLE PHASE
    In stockCAGE 55899NSN 3635-00-204-3062

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTG,ABRASIVE BELT DATA,1 EA,NO. 80 AND 120 GRIT,4 IN. W,106 IN. LG,ELECTRIC MOTOR DATA,3/4 HP AC,110/120V,60 HZ,SINGLE PHASE supplied for documented RFQ and sourcing workflows.

  4. 117894
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: 154 IN. LG; 50 IN. W; 58 IN. H; TABLE SIZE IS 12 IN. BY 42 IN.; SAW DIAMETER: 8 IN.; MOTOR: 1 H.P. 220/440 V.,3 PH.,60 CY.,1800 R.P.M.; COOLANT SYSTEM; DIAMOND WHEELS AND SAWS; TILTING TABLE; POWER TABLE FEED; SHIPPING WEIGHT APPROX. 1750 LBS
    In stockCAGE 99369NSN 3635-01-166-1192

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: 154 IN. LG; 50 IN. W; 58 IN. H; TABLE SIZE IS 12 IN. BY 42 IN.; SAW DIAMETER: 8 IN.; MOTOR: 1 H.P. 220/440 V.,3 PH.,60 CY.,1800 R.P.M.; COOLANT SYSTEM; DIAMOND WHEELS AND SAWS; TILTING TABLE; POWER TABLE FEED; SHIPPING WEIGHT APPROX. 1750 LBS supplied for documented RFQ and sourcing workflows.

  5. 118095
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FOUR SPINDLE PRECISION POLISHER FOR GRINDING LENS FOR FINE OPTICAL EQUIPMENT; LOW MAINTENANCE BEARINGS; 2.5 IN SPINDLE DIA; ECCENTRIC STROKE 0 TO 8 IN; EACH SPINDLE HAS 0.5 HP MOTOR; EA SPINDLE HAS 16 IN. POLISHING BLOCK
    In stockCAGE 99369NSN 3635-01-235-9327

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FOUR SPINDLE PRECISION POLISHER FOR GRINDING LENS FOR FINE OPTICAL EQUIPMENT; LOW MAINTENANCE BEARINGS; 2.5 IN SPINDLE DIA; ECCENTRIC STROKE 0 TO 8 IN; EACH SPINDLE HAS 0.5 HP MOTOR; EA SPINDLE HAS 16 IN. POLISHING BLOCK supplied for documented RFQ and sourcing workflows.

  6. 2M-232FB
    Grinding Machine Gl
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Gl supplied for documented RFQ and sourcing workflows.

  7. 2M-232FB
    Grinding Machine Glass
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Glass supplied for documented RFQ and sourcing workflows.

  8. 5-2416
    Cutoff Machine Glass Cutting
    In stockCAGE 02356NSN 3635-00-672-8183

    Cutoff Machine Glass Cutting supplied for documented RFQ and sourcing workflows.

  9. 5-2418
    Cutoff Machine Glass
    In stockCAGE 02356NSN 3635-00-871-6682

    Cutoff Machine Glass supplied for documented RFQ and sourcing workflows.

  10. 5-2416
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTD,FIXED HORIZONTAL SPINDLE,MANUAL FEED,SINGLE SPEED,WET CUTTING,3.000 IN. DIA MAX CUTTING CAPACITY,115V,60 HZ,1 PHASE ELEC MOTOR
    In stockCAGE 02356NSN 3635-00-672-8183

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTD,FIXED HORIZONTAL SPINDLE,MANUAL FEED,SINGLE SPEED,WET CUTTING,3.000 IN. DIA MAX CUTTING CAPACITY,115V,60 HZ,1 PHASE ELEC MOTOR supplied for documented RFQ and sourcing workflows.

  11. 5-2416
    Cutoff Machine Glas
    In stockCAGE 02356NSN 3635-00-672-8183

    Cutoff Machine Glas supplied for documented RFQ and sourcing workflows.

  12. 5-2418
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: CMETAL,WITH BONDED ABRASIVE WHEEL,SPRAYS COOLANT WHILE OPERATING,24 IN.LG,24 IN.W,48 IN.H,AC,220V,60 HZ,3 PHASE,FOR CUTTING FLAT MATERIALS OR CYLINDERS OF 3 IN. MAX DIA,VARIED ANGLE CUTS PERMITTED
    In stockCAGE 02356NSN 3635-00-871-6682

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: CMETAL,WITH BONDED ABRASIVE WHEEL,SPRAYS COOLANT WHILE OPERATING,24 IN.LG,24 IN.W,48 IN.H,AC,220V,60 HZ,3 PHASE,FOR CUTTING FLAT MATERIALS OR CYLINDERS OF 3 IN. MAX DIA,VARIED ANGLE CUTS PERMITTED supplied for documented RFQ and sourcing workflows.

  13. 5-2418
    Cutoff Machine Glas
    In stockCAGE 02356NSN 3635-00-871-6682

    Cutoff Machine Glas supplied for documented RFQ and sourcing workflows.

  14. 6DA-4
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FOUR SPINDLE PRECISION POLISHER FOR GRINDING LENS FOR FINE OPTICAL EQUIPMENT; LOW MAINTENANCE BEARINGS; 2.5 IN SPINDLE DIA; ECCENTRIC STROKE 0 TO 8 IN; EACH SPINDLE HAS 0.5 HP MOTOR; EA SPINDLE HAS 16 IN. POLISHING BLOCK
    In stockCAGE 99369NSN 3635-01-235-9327

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FOUR SPINDLE PRECISION POLISHER FOR GRINDING LENS FOR FINE OPTICAL EQUIPMENT; LOW MAINTENANCE BEARINGS; 2.5 IN SPINDLE DIA; ECCENTRIC STROKE 0 TO 8 IN; EACH SPINDLE HAS 0.5 HP MOTOR; EA SPINDLE HAS 16 IN. POLISHING BLOCK supplied for documented RFQ and sourcing workflows.

  15. BM-106C-RP24
    Grinding Machine Gl
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Gl supplied for documented RFQ and sourcing workflows.

  16. BM-106C-RP24
    Grinding Machine Glass
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Glass supplied for documented RFQ and sourcing workflows.

  17. BM106G-RP
    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTG,ABRASIVE BELT DATA,1 EA,NO. 80 AND 120 GRIT,4 IN. W,106 IN. LG,ELECTRIC MOTOR DATA,3/4 HP AC,110/120V,60 HZ,SINGLE PHASE
    In stockCAGE 55899NSN 3635-00-204-3062

    GENERAL CHARACTERISTICS ITEM DESCRIPTION: FLOOR MTG,ABRASIVE BELT DATA,1 EA,NO. 80 AND 120 GRIT,4 IN. W,106 IN. LG,ELECTRIC MOTOR DATA,3/4 HP AC,110/120V,60 HZ,SINGLE PHASE supplied for documented RFQ and sourcing workflows.

  18. BM106G-RP
    Grinding Machine Gl
    In stockCAGE 55899NSN 3635-00-204-3062

    Grinding Machine Gl supplied for documented RFQ and sourcing workflows.

  19. GL-50A
    Lathe Glass
    In stockCAGE 89399NSN 3635-01-048-8836

    Lathe Glass supplied for documented RFQ and sourcing workflows.

  20. GL100A
    Lathe Glassworking
    In stockCAGE 89399NSN 3635-00-108-4366

    Lathe Glassworking supplied for documented RFQ and sourcing workflows.